KHX16C10B1K2/16X 取り外すまで問題なく使用してました。 ノークレームノーリターンでお願いします。 スペック JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply VDDQ = 1.5V (1.425V ~ 1.575V) 667MHz fCK for 1333Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 9, 8, 7, 6 Programmable Additive Latency: 0, CL - 2, or CL - 1 clock Programmable CAS Write Latency(CWL) = 7 (DDR3-1333) 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C Asynchronous Reset PCB : Height 1.18” (30.00mm) w/ heatsink, double sided
如因下列事件引致運送過程中導致貨品毀損、延遲,Jumppoint 皆不負任何責任︰
i. 包裝不穩固或未作加強而引致有破裂、毀損;
ii. 貨品性質為易燃、爆炸、發霉、腐壞、變色等;
iii. 易碎物品沒有標貼上「易碎標籤」;
iv. 無法預知或不可抗力因素,如交通事故、惡劣天氣情況等引起之阻礙或延遲;
v. 收件人聯絡電話不正確或無效等等。